FAQ

Set the "26⇔30 hole switching lever" to the 30 side. When punching 26 holes, set the "26 ↔ 30 hole switching lever" to the 26 side.

The difference between the pin type and the lever type is the method of changing the date and number.The pin type selects the date and number by pulling out the pin, aligning the numbers, and then inserting the pin.The lever type selects the date and number by moving the lever up and down like a one-motion check writer.For dates that only need to be changed once a day, we recommend the inexpensive pin type, and for numbers that change frequently, we recommend the easy-to-change lever type.

It may not be possible to engrave it firmly, so we recommend that you provide us with a sample and test it.

The banknote counter (BN106) can count other than banknotes, but it cannot count unless the size is 50 mm or more in height, 120 mm or more in width, and the thickness is within the range of 0.06 to 0.12 mm. cannot be counted.If you wish to count gift certificates other than bills, please provide a sample and we will conduct a countability test and make a judgment.

Most of the premium regional promotion tickets are of a size and thickness that can be counted by a bill counter (BN106), but due to the variety of printing conditions, we ask that you send us a sample in advance and set it up before delivery. We are here.

Due to the structure of the paper feed, it is limited to use with one sheet of paper.Copies cannot be used.

The heaviest punch is the PN-1, which weighs 7.8 kg and can be used in different locations.
The electric punch is 1 kg of PN-19E, so please specify the place and use it.

The center-to-center pitch of the 6mm diameter holes is 80mm.Depth is 12mm. According to JIS standard.

The paper size for computer binders is generally 15inch x 11inch.The punch is a product that punches on the 11 inch (short side) side.The center-to-center pitch of the 4.5mm diameter holes is 12.7mm.1 mm from the left gauge to the first hole. The distance from the 6.35nd hole to the right edge of the paper is 22 mm.The depth is 23.95 mm.

PN-3 (manual 2 holes) can be changed to 7 mm or 12 mm.Other models are fixed.For special specifications, please contact us by email.

It means that you can punch holes in A4 paper that can be bound in A4S 4-hole file.To use, first align the side gauge with the display position of "888" and open a hole.At this time, two holes will be made on one side of the A4 paper, so turn the paper over and make holes again according to the position of "2".This will open a hole that can be bound into an A888S 4-hole file.In addition, "4" comes from the fact that the distance between the four holes is 888 cm each.

Set the "26⇔30 hole switching lever" to the 30 side. When punching 26 holes, set the "26 ↔ 30 hole switching lever" to the 26 side.

Consumables can be purchased from our online shop.
For parts not listed, please ask your local stationery store or office equipment store to order them.
Click here for online shop

This is a machine that punches out dates, numbers, marks, company names, codes, symbols, etc., on warranty cards, securities, slips, and other documents using perforated letters made up of small holes.Hole characters cannot be easily erased or modified, which helps prevent falsification.In addition, since you can perforate 10 to 30 sheets of paper at once, it is useful for streamlining office work and preventing omissions of entries and stamps.

In important documents such as contracts, a seal is stamped on the boundary between each page to prove that each page is a series of documents.The process of associating a series of documents with hole letters instead of seals is called a contract.There is also a seal machine that can punch holes such as numbers, letters, and marks, and at the same time bind both sides of the holes with a stapler.

They are divided according to their usage.The machine used for the above contract work is the contract machine.In addition to this, the Perforator is used for giving dates and numbers, erasing by "PAID" and "VOID", marks, company names, symbols, etc.

The difference between the pin type and the lever type is the method of changing the date and number.The pin type selects the date and number by pulling out the pin, aligning the numbers, and then inserting the pin.The lever type selects the date and number by moving the lever up and down like a one-motion check writer.For dates that only need to be changed once a day, we recommend the inexpensive pin type, and for numbers that change frequently, we recommend the easy-to-change lever type.

This is an embosser that makes unevenness on paper.This is a machine that sandwiches paper from the top and bottom and expresses marks and letters with unevenness.Stamped marks and characters cannot be easily erased, which helps prevent falsification.This is a machine that is often used for stamps on ID cards.

It's the same color as the paper.

No change.The amount varies depending on the size of the stamp, but it does not change depending on the content.If it does not fit within the size of the stamp, we will change the number of characters that can fit, and we will propose changes and arrangements so that complex patterns can be expressed when pressed.

can make.The stamp face diameter is the maximum diameter of the model, and as long as it fits within that range, it can be made in any size and shape.However, very fine characters and patterns may not stand out, so we recommend that you make a stamp face that is as close to the diameter of the stamp face as possible.

can make.In addition to circles, elliptical and square stamps can also be made.You can also make braille printing surfaces.However, it is limited to the stamp face diameter of each model.Ellipse: Long axis is less than the diameter of the stamping face (e.g. 110mm or less for EMS-27) Square: Diagonal line is less than the diameter of the stamping face (Example: 110mm or less for EMS-27) However, by enclosing the mark, the paper is pulled evenly and wrinkles are less likely to occur.Square: The diagonal line is less than the diameter of the stamp surface (e.g. EMS-110, the diagonal line is less than 27mm).Although it is possible to create a design without a box, by wrapping the mark around the mark, the paper will be pulled evenly and wrinkles will be less likely to occur. There are advantages to being

can.If you want to change the stamp face or its content, you will need to purchase a unit for the stamping part called the stamp face die block.The stamp face die block can be attached and detached with one touch.For commercial use, we have a track record of alternately using middle school and high school seal blocks for one main unit at a junior high school and high school.

It can be changed by the customer.

It may not be possible to engrave it firmly, so we recommend that you provide us with a sample and test it.

① Estimate
Please request a quote.Any format is fine, so please send the quotation request form by fax or email.Items to be filled in: Model/number/usage/customer contact information

②Determine order
Once you have decided on your order, please send us the design image of the seal you want to make in PDF or JPG. (Please specify the model name, number of units, size of stamp, thickness of paper you want to use, and orientation.) We also accept printed materials and handwritten materials other than data.A separate charge for creating a copy will be charged.
*It will be easier to check the thickness and orientation if you can get a sample of the paper you actually use.
*When you have decided to place an order and send us your design, please send us the "order form" together. (Please indicate the delivery address and product number.)

③Confirmation of manuscript
We will send you a confirmation manuscript, so please check the contents.If you need to make any adjustments, please let me know at this time.
*What is a manuscript?It is an image diagram showing the design on paper in two colors, black and white.
[Black: Convex (raised) / White: Concave (flat)] Please check the pattern, letters, size, appearance of unevenness, direction, etc.

④ Manuscript decision
After signing, please send it to us by fax.We will inform you of the delivery date later.

⑤Delivery

The banknote counter (BN106) can count other than banknotes, but it cannot count unless the size is 50 mm or more in height, 120 mm or more in width, and the thickness is within the range of 0.06 to 0.12 mm. cannot be counted.If you wish to count gift certificates other than banknotes, please provide a sample and we will conduct a countability test and make a judgment.

This is a function to stop counting at the set number of pieces. It is often used when you want to make a bundle of 100 sheets.

It is possible with the batch function of Q2 (A2).

Most of the premium regional promotion tickets are of a size and thickness that can be counted by a bill counter (BN106), but due to the variety of printing conditions, we ask that you send us a sample in advance and set it up before delivery. We are here.

Due to the structure of the paper feed, it is limited to use with one sheet of paper.Copies cannot be used.